oompa loompa
I AM THE GOVERNATOR
"Git 'Er Dun!"
Posts: 1,301
|
Post by oompa loompa on Aug 22, 2004 2:35:58 GMT -5
recently, i've acquired a netburner processor card that has all the fixins for ethernet, parallel i/o, etc. here's a link to what it actually is www.netburner.com/products/processors/CFV2_40.htm. when i jacked *cough* acquired this board, i didn't recieve any development tools, or docs what's trippy is that there's no way to contact support, or download any development tools, or any useful docs without a frickin serial ID from the so called development tools. so if there's anyone that has any good technical info on this board, or that can "hook" me up with some dev tools, it'd be happily appreciated or else i guess i'm going to have to desolder it up for parts and take a shit on this $400 quality device (coldfire at 40mhz=coolies). it works too, i guess, since led's turn on
|
|
|
Post by Tom Maneiro on Aug 22, 2004 21:48:42 GMT -5
Coldfire? can it run 68K code?
|
|
oompa loompa
I AM THE GOVERNATOR
"Git 'Er Dun!"
Posts: 1,301
|
Post by oompa loompa on Aug 24, 2004 1:05:28 GMT -5
the instruction set is almost exactly the same, but i think some opcodes are changed here and there
|
|